Another day, another roller shutter motor that simply couldn’t cope.
This customer called us out after a previously installed motor failed again – just a few years after being replaced by another provider. Paying twice for the same issue is frustrating, but sadly it’s common when under-powered or poor-quality motors are fitted.
We didn’t supply or install the original motor. We were brought in to diagnose the failure and fix the root cause properly.
A roller shutter motor that isn’t correctly rated for daily use will always be living on borrowed time. When they fail, they don’t give you much warning. One minute you’re pressing the button… the next, your shutter is stuck shut like a metal drawbridge that’s gone on strike.
That’s when people call Garage Door Repair Centre.
The Real Problem: Incorrect Motor Specification
Most repeat failures come down to one thing – the wrong motor for the job.
In this case, the existing motor simply wasn’t powerful enough for the shutter it was lifting. Lightweight motors might work initially, but daily use exposes the weakness fast. They overheat, struggle under load, and fail far sooner than they should.
Replacing it with the same type of motor would have guaranteed the problem returned.
Why Cheap Roller Shutter Motors Fail
Common reasons we see across Leicestershire include:
- Underpowered ratings – the motor struggles every time the shutter opens or closes
- Overheating – constant strain shortens motor life dramatically
- Low-quality internal components – cheaper gears and electronics wear out fast
- Incorrect matching – the motor isn’t suited to the size, weight, or usage of the shutter
- False economy – lower upfront cost, higher long-term repair bills
These motors often work “well enough” at first, which hides the problem. But daily use quickly exposes the weakness – leading to sudden failure, downtime, and repeat callouts.
That’s why replacing like-for-like rarely fixes the issue.
Our Fix: Solving the Problem, Not Repeating It
After assessing the shutter and load, we installed a properly specified heavy-duty roller shutter tube motor with significantly higher power capacity than the failed unit.
No shortcuts. No guesswork. Just the right motor for the job.
The result:
These motors often work “well enough” at first, which hides the problem. But daily use quickly exposes the weakness – leading to sudden failure, downtime, and repeat callouts.
That’s why replacing like-for-like rarely fixes the issue.
- Smooth, faster operation
- Stronger lifting power with less strain
- Reduced wear on the shutter system
- A longer-lasting, more reliable setup
- Confidence that the problem won’t come back
Because our vans are fully stocked, this was completed as a same-day repair. One visit. One fix. Shutter back in action.
Same-Day Roller Shutter Repairs Across Leicestershire
We provide same-day roller shutter repairs across Leicestershire, dealing with issues caused by wear, age, or incorrect previous installations, including:
- Failed or under-powered motors
- Jammed or stuck shutters
- Broken cables or damaged slats
- Electrical and control faults
If it wasn’t installed right the first time, we’ll put it right.
Need Your Roller Shutter Fixed Properly?
Reliable diagnosis. Correct repairs. Same-day service across Leicestershire.
Get in touch today and we’ll get your shutter moving again – properly.
